Potassium hydroxide is individually packaged, and potassium hydroxide has a liquid, but also solid, so you know how to carry out packaging? Potassium hydroxide according to the needs of all walks of life, will be divided into solid, solution and powder and other different forms, so, in order to facilitate transportation and storage we will choose to carry on the packaging. Then its packaging is also a lot of ways, the following specific to introduce the product packaging methods.

1. The solid block potassium hydroxide is packed in a straight open steel drum, whose specifications and dimensions conform to the regulations, and the thickness of the steel drum conforms to the regulations of medium and light type drum. The net contents per barrel were 50kg, 100kg, 150kg and 200kg.

2. Solid sheet products are packaged in two layers. The inner packaging is made of polyethylene plastic film bag, and the outer packaging is made of polypropylene coated woven bag. The net content of each bag is 25kg, 40kg and 50kg. Ton packaging can also be used, the size of the container and the net content of each bag can be negotiated according to the user's requirements. When packing, the inner layer shall be tied with nylon rope or other rope of equivalent quality, and the outer woven bag shall be sewn with a sewing machine. The seam shall be firm and there shall be no jumper and thread leakage.

Potassium hydroxide

3, solid flake potassium hydroxide can also be used in double-layer packaging. The inner packing shall be made of polyethylene plastic film bag with a thickness of not less than 0.1mm; the outer packing shall be made of straight open steel drum in full open steel drum, the specifications and dimensions of which shall conform to the provisions of GB/T325.2-2010, and the thickness of steel drum shall conform to the provisions of light type drum in GB/T325.2-2010. The net content per barrel is 50kg or 100kg. When packing, the inner bag shall be tied with nylon rope or other rope of equivalent quality, and the iron barrel and the barrel cover shall be fixed with barrel ring to ensure that the barrel cover is not loose and the whole body is firm.

4. The solution shall be shipped by special railway tanker or highway tanker and iron drum. The upper opening of the tank car shall be tightly covered and clamped with an iron cover.

5. Ton packaging can also be used, and the size of the container and the net content of each bag can be negotiated according to the user's requirements.

With the introduction of potassium hydroxide packaging for everyone here, potassium hydroxide is also a very demanding chemical composition, I hope you should pay attention to the use of the requirements and specifications to use, according to the above understanding we usually according to the weight of the product and form to feel the way of its packaging, of course, can also be negotiated according to customer requirements. The above are conventional packaging methods, and we should choose the appropriate packaging method according to the actual situation.